100Mbps/1000Mbps 5V 3A Type-C Power Over Ethernet Active POE Splitter for Raspberry Pi 4B - 1000Mbps
Description:1. A POE splitter can split the POE signal into 5V USB-C power supply and gigabit Ethernet in RJ45 so that non-POE devices can be powered over Ethernet.2. The splitter complies with the IEEE802.3af/at standard and can provide DC 5V power supply for network terminals below 15W.3. The spli..
$7.99
Ex Tax:$7.99
Parameter:
Size: 29*24*18mm(length*width*height, irregular size, most prominent part of measurement)
Use:
Science experiments, electronic instruments, negative ion generators, scientific productions, etc.
Note:
1. The high-voltage winding of the transformer is in the inner l..
$7.99
Ex Tax:$7.99
Specificaions:
Charge voltage range: 12.6-13V
Overcharge voltage range: 4.25-4.35v ± 0.05v
Overpressure voltage range: 2.3-3.0v ± 0.05v
Size: 53 * 17 * 4mm
Maximum operating current: 6-8A
Maximum instantaneous current: 10-13A
Operating temperature: -40 --- +50 ℃
Storage conditions: -40-..
$9.99
Ex Tax:$9.99
Specification:
Size: approx.50x16x1mm
Maximum discharge current: 10A
Overcharge detection voltage: 4.25-4.35V±0.05V
Over-discharge detection voltage: 2.3-3.0V±0.05V
Maximum working current: 5A-8A
Transient current: 9A-10A
Operating temperature: -40~50℃
Storage temperature: -40~80℃
Quies..
$19.99
Ex Tax:$19.99
Specifications:
Single Cell overcharge protect voltage: 4.23 - 4.28V
Single Cell overcharge rotect recover voltage: 4.08 - 4.18
Overcharge protect delay: 0.5 - 1.5S
Single Cell over-discharge protect voltage: 2.72 - 2.88V
Single Cell over-discharge rotect recover voltage: 2.9..
$19.99
Ex Tax:$19.99
Description: The rotary encoder is used to measure the speed and with PWM technology can achieve rapid speed devices With fixed bolt hole for easy installation Great for DIY project Specification: Model: KY-040 Working voltage: 5V Material: PCB + Brass Weight: 10g Size: 32..
$8.99
Ex Tax:$8.99
10Pcs Infrared Obstacle Avoidance Sensor For Smart Car Robot Description: The sensor module light is adaptable to the environment, the working voltage of 3.3 V to 5 V. It has a pair of infrared transmitting and receiving tube, when detecting direction meet with obstacles (ref..
$4.99
Ex Tax:$4.99
Specifications:
Color: Green + Red
Diameter: 5mm
Package Type: Diffusion
Voltage: 2.0-2.5v
Current: 10mA
Viewing angle: 150 degree
Wavelength: 571 +644 nm
Luminous intensity (MCD) :20-40; 40-80
Stent type: long-legged
Package Included:
10 x KY-011 Two Color Red and Green LED M..
$14.99
Ex Tax:$14.99
10Pcs KY-016 RGB 3 Color LED Module For Red Green Blue Description: This is RGB 3 color LED module for red green blue Brand: KEYES Module: KY-016 Material: PCB RGB signal output 3 color: Red, green, blue Compatible with DIY project Package included: 10 x RGB 3 colo..
$5.59
Ex Tax:$5.59
10Pcs Mini 1A Lithium Battery Charging Module Board With USB Interface
Description:
Charging method: linear charge 1%
Charging current: 1A adjustable
Charge accuracy: 1.5%
Input voltage: 4.5V-5.5V
Full charge voltage: 4.2V
Charging indicator: Red charging green full charge
Charging input in..
$7.99
Ex Tax:$7.99
>>>Code: Click here to open<<<Features:Weight: 7g (approx)Dimension: 3.2cm x 2.4cm x 2.8cm (approx)Infrared sensor with control circuit boardThe sensitivity and holding time can be adjustedWorking voltage range: DC 4.5V- 20VCurrent drain:<60uAVoltage output: High/Low level signa..
$19.99
Ex Tax:$19.99
Features:Smart reverse polarity protection, reverse power supply will not damage the IC.IC control circuit and LED point light source share a power supply.Control circuit and RGB chip integrated in a 5050 package components, constitute a complete external control pixel.Built-in signal shaping circui..
$1.40
Ex Tax:$1.40