Description:1. A POE splitter can split the POE signal into 5V USB-C power supply and gigabit Ethernet in RJ45 so that non-POE devices can be powered over Ethernet.2. The splitter complies with the IEEE802.3af/at standard and can provide DC 5V power supply for network terminals below 15W.3. The spli..
Specifications: 3 different capacities for your choice: 32GB/64GB/256GB
eMMC5.1 specification compatibility: backward compatible with eMMC 4.41/4.5/5.0Bus mode:
- Data bus width: 1 bit (default), 4 bits, 8 bits
- Data transfer rate up to 400MB/s (HS400)
- MMC I/F clock frequency: 0~200MHzWorking vol..
Description:This camera is compatible with any version of Raspberry Pi.You can adjust it based on the distance.
Features:5 million pixelsOV5647 sensor chipCamera parameters:CCD Size: 1/4 inchAperture (F): 1.8Focal length (Focal Length): 3.6mm (adjustable)Viewing angle (Diagonal): 75.7 degr..
Feature:
- Suitable forRaspberry Pi 2 Model B & Pi B+ w/ Screws
Specifications:
Material: ABS
Dimensions: 3.5 in x 2.7 in x 1 in (90 mm x 70mm x 25 mm)
Weight: 35g
Packing included: 1x ABS Case
,,,,,,
var lazyImages = document.querySelectorAll('img[da..
Specification:Soc: Allwinner R40/V40CPU: quad-core cortex-A7,the most power efficient CPU core AR M's ever developmentGPU: dual-core MALI-400 MP2 and runs at 500MHz, capable of 1. 1 Gpixel/s throughput. Graphics capabilities are slightly high er than the original Xbox's level of performance. The GPU..
Description:
This camera is compatible with any version of Raspberry Pi.
You can adjust it based on the distance.
Features:
5 million pixels
OV5647 sensor chip
Camera parameters:
CCD Size: 1/4 inch
Aperture (F): 1.8
Focal length (Focal Length): 3.6mm (adjustable)
Viewing angle ..
Descriptions:
This case is new fashion design for Raspberry Pi 2 Model B, transparent + black shell, five layer acrylic composition, simple and elegant, easy to install, all open interfaces, easy to use GPIO, TF card, USB and other interfaces,it use for raspberry Pi 3.2-inch, 3.5-inch screen and a p..
Features:- Fits Raspberry Pi 4B/3B+/3B- Using high-quality relays, heavy load: AC 250V/5A, DC 30V/5A- With optocoupler isolation to avoid high-voltage circuit interference- With relay indicator light, easy to check the working status of the relay- With relay selection jumper cap,..
Colorful Acrylic Shell With A Fan Mouth For Raspberry Pi 2 Model B
Specification:
Device Type: Case Box For Raspberry Pi B+ and Raspberry Pi 2
Color: 4 color for choosing
Dimension: 90 x 70 x 35mm
Note: case only, the Raspberry Pi B+ and Raspberry Pi 2 is not included.
Package Included:..
Description:
It is a MMDVM hotspot digital networking box.Display firmware has been updated.Imported temperature-compensated crystal oscillators in DMR format with zero frequency deviation and duplex dual time slots are used.It supports C4FM, DMR, DSTAR P25 and other digital formats.It solves incon..
Specification:Product Name: MMDVM_HS_Dual_HatCompatibility: Pi-star software and raspberry hardware (rpi 0-3), not compatible with new pi4b without removing right socketOperating Frequency Bands: 144-148, 219-225,(Main Band)420-475, 842-950 MHzDuplex Mode Operating Frequencies: RX: 438.000000 TX: 43..